Marine Mooring System
QD Waysail
Aquaculture
0102030405
250mm Double Holes Injection Molded HDPE Fish Cage Bracket
DESCRIPTION:
250mm double collars bracket is designed for the fish cages with two floating pipes of diameter of 250mm, the collar hole size can be fitted with outside diameter 125mm upright pipes and 110mm handrail pipe, related tee size is 125 x 110mm, walkway pedal size is 470 x 650. Whole sets of HDPE accessories can be provided.
Our produced HDPE Bracket is manufactured by mould pressure injection machine, the min. thickness of its part is ≥20mm. HDPE bracket together with butt fusion welding 110mm-180mm upright pipe and 110mm- 180mm same diameter Tee consists of cage I frame. I-frame is evenly distributed along the perimeter of the cage frame, with a spacing of 1.5m-2m.
DESIGN DRAWING:
ASSEMBLY STRUCTURE:
Brackets, Upright Pipe, Tees, Stoppers and Pins are provided together.
Client can do fish cage assembly work easily on site.
INJECTION BRACKETS ARE WITHIN STOCK:
How To Do Assembly Work Of Fish Cage Bracket, Upright And Tees?
Firstly, do the butt fusion welding work for the tee and upright pipe, the diameter of upright pipe is equal to that of tee. Then, plug the well fished upright pipe into the hole of bracket. Welding Requirement：
1.Welding should ensure that the section is completely in the middle and the wrong side does not exceed 10% of the wall thickness.
2.The butt temperature should be kept at 210-230℃, and the melting length of the two ends should be 1-2mm
3.Pipe heat absorption time 70-120s, cooling time 10-16min.
APPLICATION:
Offshore Aquaculture Cage
